Infocenter.nokia.com

LDAP health check

WebThe health check for LDAP is configured under config > system > security > password.. The health-check function, which can be disabled, is available for operator management. …

Actived: Just Now

URL: https://infocenter.nokia.com/public/7750SR227R1A/topic/com.nokia.System_Management_Guide/ldap_health_che-ai9exj5x9r.html

Network Services Platform functional overview

WebThe Nokia Network Services Platform (NSP) is a group of interoperating network management modules that provide comprehensive end-to-end management of a wide …

Category: Health Go Health

Setting the MTU Value for the Management Port

WebThe operational MTU for the port is set to the lesser of the values configured with the ip-mtu command and the management port MTU. For example, with the port MTU fixed at 1514 …

Category: Health Go Health

OAM performance monitoring

WebOAM Performance Monitoring (OAM-PM) provides an architecture for gathering and computing Key Performance Indicators (KPIs) using standard protocols and a robust …

Category: Health Go Health

EHS configuration and variables

WebEHS is triggered on log events that are dropped by user-configured log filters assigned to individual logs ( config > log > filter ). The EHS event trigger logic occurs before the …

Category: Health Go Health

Port Cross-Connect

WebPort Cross-Connect. PXC Terminology. Overview. Port-Based PXC. Internal PXC. PXC Sub-Ports. Bandwidth Considerations and QoS. Operational States. PXC Statistics.

Category: Health Go Health

Configuring Security with CLI

WebNote: If configuring management access filters via a Telnet session, ensure that data from the host IP address is permitted before setting the default action to deny; …

Category: Health Go Health

Stateful inter-chassis NAT redundancy

WebThe activity (active or standby) of a NAT group is determined by an internal health parameter that represents the node’s ability to perform NAT at full capacity. The value of …

Category: Health Go Health

Configuring stateful inter-chassis NAT redundancy

WebCPM level synchronization is required to primarily exchange health information and keepalives between the nodes for the purpose of determining active and standby NAT …

Category: Health Go Health

Automatic Protection Switching (APS)

WebThe Network Elements (NEs) in a SONET/SDH network constantly monitor the health of the network. When a failure is detected, the network proceeds through a coordinated pre …

Category: Health Go Health

IP Router Configuration

WebNetwork Interface. A network interface (a logical IP routing interface) can be configured on a network-facing physical or logical port, and is used for connectivity purposes. Each …

Category: Health Go Health

AAA RADIUS server operation status

WebThe down-timeout default value is the timeout value multiplied by the number of retry attempts. The timeout value is the time that the router waits for the RADIUS server to …

Category: Health Go Health

SNMP Show Command Reference

WebTable 40 describes the SNMP counters output fields. Table 40: Show Counters Output Fields. Label. Description. in packets. Displays the total number of …

Category: Health Go Health

2. ISA and ESA Hardware

WebISA and ESA Hardware. 2. ISA and ESA Hardware. 2.1. In This Section. This section provides an overview of Nokia’s implementation of the ISA and ESA hardware. Note: …

Category: Health Go Health